Before rushing into the service centre, take these steps to check your ride on for a simple solution.
1. Check tyre pressures. Make sure all tyre pressures are equal and to the manufacturers recommendation. This can be found on the side of the tyre. (1.)
If unsure, contact us. We are happy to advise
2. With your ride on mower parked on a level surface. Using a ruler or tape measure, (tool in picture not necessary) take the following measurements.
Measure from bottom of cutter blade to the ground surface. Be sure to measure both ends of the blade. If uneven, check your deck linkage adjustments. Adjust if required. (2.)
3. Check your cutting blades. Make sure they are not bent or excessively worn in an uneven pattern. If found damaged, replace them.
* If unsure after these checks have been carried out, contact our service department. (3.)